Pages

Saturday, July 12, 2014

A Wiring Strain-Relief Method


When installing line cord cable in electrical box fittings, a slit, 1" length of fuel line tubing makes a fine strain-relief/clamp-pad, like so.


Pictured is 16/3 SJOOW[1] cable in a piece of 5/16" I.D. tubing. That combination fits nicely in an armored cable connector. The cable's jacket is firmly gripped, without being pinched, by the tubing.

- - -

Note:

[1] 'SJOOW' is one of many designations of flexible line cord type.

SJOOW works out as follows:
S = Stranded (or Service) Cord.
J = Junior Service Cord. (Up to 300 Volts. Absence of a 'J' indicates Hard Service -- up to 600 Volts.)
OO = Both outer jacket and inside insulation are oil resistant.
W = CSA designation for a weather/water resistant cord.

There's a pretty good listing of most of the types here. I find the designation system a bit arcane and clumsy, but maybe that's just me.

# # #


# # #